K5

With the K5 you will get a five-axis dry milling machine for a particularly wide range of possibilities. The particularly stable construction of the K5 guarantees excellent machining results. Numerous simplicity features such as an automatic drill changer or a practical accessory tray make working with the K5 quick and efficient.

B axis up to ± 35 degrees

5 simultaneous working blades in addition to the three linear axes ux, yiz, two rotary axes provide a variety of machining options. The rotation range is up to ± 35 degrees. The B-axis with its remarkably large rotational range makes the K5 ideal for models and surgical templates, as well as for prosthetics and implantology. Blocks up to 40 mm thick.

K5 allows you to mill a wide range of materials and indications: discs and blocks of wax, plastic, zirconium oxide and composites to base alloys based on cobalt chromium.

Machine base made of solid cast aluminum. The cast housing, which is closed on five sides, absorbs vibrations and ensures high stability of the entire machine. The additionally reinforced linear conductors ux, yiz, as well as the double-mounted B axis further increase the strength of the entire shaft system - so you always get first-class milling results.

Automatic transmission for 16 drills

In addition to the drills you currently need, you can immediately equip the charger with replacement drills. This allows you to continue working continuously if the drill bits are worn.

Powerful and very precisely synchronized spindle

With quadruple hybrid ceramic ball bearings and a nominal power of 300 W under continuous load - it enables balanced torque.

Sophisticated protection mechanisms

Automatic safety switch on the front cover during processing. The established working chamber sealing concept in combination with rubber protection effectively protects the mechanics, electronic and spindle from dust and sawdust.

Practical accessory drawer

Your drills and discs are well stored and at hand. The drawer also has an integrated drill stand (ATB). Its 30 number slot will be recorded using DentalCAM software.

 

 

CONTACT US

Futura Dental doo

Kralja Zvonimira 108
10,000 Zagreb, Croatia

Contact and inquiries:
info phone: +3851 2342949
 
User support: +3851 4440070, mail: support@futura-dental.hr

All visitors are provided with free parking in the yard
(entrance from Zvonimirova).

     

     

    Futura Dental doo | Kralja Zvonimira 108, 10000 Zagreb, Croatia, tel: 01/2342949, Fax: 01/2342949, e-mail: info@futura-dental.hr, MBS: 080595075, MB: 2179725, OIB: 41590421836, IBAN: HR0523600001101939777, SWIFT: ZABAHR2X, IBAN: HR4323400091110756834, SWIFT: PBZGHR2X | Share capital: HRK 20,000.00 paid in full Board member: Vjekoslav Budimir Company registered in the court register of the Commercial Court in Zagreb

    @ Futura Dent Estetica doo | Terms of use | Privacy policy

    EN